The projector ZH462 by Optoma operates as a 3D-DLP device with 5000 ANSI lumens, a HDTV 1920 x 1080 resolution and a contrast of 300000:1. This is a laser projector with a light source designed to last for 30000 hours, which translates to 20.5 years with 4 hours of daily use. The image geometry can be adjusted via the built-in keystone correction so that a clean, rectangular display is achieved even with non-ideal placement. A look at the light output reveals: The 5000 ANSI lumens are sufficient to illuminate an image width of up to 718 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 479 cm. Regarding signal processing, the model is compatible with incoming 1080P content and 4K as well as 3D, and also offers the technical capability for 360° projection. For integration into professional environments, an RJ45 connection is available for network control and remote maintenance.
Display Type
1 x DLP Chip HDTV 16/9 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
5000
Screen
2222 Lux (200 cm Screen width)
Contrast
300000:1 full on/off
300000:1 full on/off
Black Level
0,0167 min. Lumen
0,007 min. Lumen
Offset
66% 18 cm over screen top edge →
SCREEN
+Projector
Resolution
HDTV 1920 x 1080
2.073.600 Pixel UHD (4K2K) 3840 x 2160 compressed
Standard-Portabel | External training and company presentations, as well as product presentations. Wide screen width or rooms with plenty of light (over 200 lumens).
Real Full HD 3D Full HD 1080P compatible Eco Mode Automatic and manual vertical keystone correction Kensington Slot 360° installable 24/7 continuous operation capable Password protection PJLink™ Optional Wi-Fi network compatible. Lan network compatible. Crestron®-Software compatible. AMX
Real Full HD 3D
Optoma Website
Product Sheet english
