The W303ST model from Optoma combines DLP technology in the Short Distance sector with 3000 ANSI lumens, a contrast of 18000:1 and a native WXGA 1280 x 800 resolution. The manufacturer specifies a runtime of 4500 hours for this projector's lamp. With two hours of daily operation, this corresponds to a period of 6.2 years. A special feature is the short-throw lens, which allows the device to be positioned at a very short distance from the screen. According to the data sheet, an image width of 2 meters is achieved from a distance of just 104 cm. Looking at practical performance, up to 556 cm can be illuminated with 3000 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 371 cm. In terms of video signals, the device processes resolutions up to Full HD 1080P as well as 3D. Since entering the market in 2015, production has been discontinued; the manufacturer no longer actively offers the model.
Display Type
1 x 0,65" DC3 DLP Chip WXGA 16/10 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
3000
Screen
1200 Lux (200 cm Screen width)
Contrast
18000:1 full on/off
18000:1 full on/off
Black Level
0,1667 min. Lumen
0,067 min. Lumen
Offset
62% 15 cm over screen top edge →
SCREEN
+Projector
Resolution
WXGA 1280 x 800
1.024.000 Pixel UXGA 1600 x 1200 compressed
Real Full HD 3D Full HD 1080P compatible Eco Mode Kensington Slot Password protection Remote control with mouse control Short-throw projector Crestron®-Software compatible.
Real Full HD 3D
Optoma Website
Product Sheet english
