Known as the PT D9510E, this DLP projector by Panasonic features basic specs of 10000 ANSI lumens, a contrast of 1000:1 at a XGA 1024 x 768 resolution. The manufacturer lists the lamp life at 1500 hours. Both optical image shifting (lens shift) and digital keystone adjustment are included, enabling exact alignment on the screen. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Projection Calculator. A look at the light output reveals: The 10000 ANSI lumens are sufficient to illuminate an image width of up to 871 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 581 cm. Should very large projection surfaces be required, the integrated edge-blending software offers the possibility to seamlessly combine images from multiple projectors without visible seams. For media input, video signals up to 1080P are supported. For integration into professional environments, an RJ45 connection is available for network control and remote maintenance. The projector was released in 2001 and is officially no longer distributed by Panasonic. Note: According to our information, replacement lamps (original or generic) are no longer available for this projector.
Display Type
3 x 0,9" DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
10000
Screen
3333 Lux (200 cm Screen width)
Contrast
1000:1 full on/off 550:1 Ansi
1000:1 full on/off 550:1 Ansi
Black Level
10,0000 min. Lumen
3,343 min. Lumen
Offset
0,0% 75 cm under screen top edge →
SCREEN
+Projector
Resolution
XGA 1024 x 768
786.432 Pixell
SXGA 1280 x 1024 compressed
Full HD 1080P compatible
Panasonic Website
Product Sheet
