Behind the name EMP 7250 is a LCD projector by Epson, whose main features include 1300 ANSI lumens, a contrast of 300:1 and a XGA 1024 x 768 resolution. The runtime of the lamp in this model is estimated at 2000 hours before a replacement is necessary. Looking at practical performance, up to 314 cm can be illuminated with 1300 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 209 cm. Since entering the market in 1999, production has been discontinued; the manufacturer no longer actively offers the model.
XGA 1024 x 768
786.432 Pixel
UXGA 1600 x 1200 compressed
Video Modes
NTSC, PAL, SECAM Pal 60 NTSC 4,43
Application
Standard-Portabel | External training and company presentations, as well as product presentations. Small screen width, rooms with very little ambient light below 50 lumens.
I also have this projector and am completely satisfied with it. but soon I will need a new lamp; unfortunately I have only found prices of almost 400 euros and more so far. after your report I immediately looked on ebay, but unfortunately I didn‘t find anything there. now I need your help... where can I please find the lamps for around 70 euros like you have?!?!?!?? thanks in advance!!! greetings, alex
Autor:
Michael 30.08.07
5
Stars
Device is fine
I have the projector and am satisfied so far.
What is a bit annoying, however, is the volume of the fans or a fan. I will try to replace it the next time I change the lamp - maybe the volume can be improved.
In addition, a screen is highly recommended as the device does not have the best brightness and contrast ratio. A screen is (logically) much better than, for example, woodchip (which I had before).
I recently bought the 2nd lamp. Both were new, the first cost 70 euros, the second 65 euros (on Ebay). I chose this device because it has virtually all the necessary inputs (there was no DVI and HDMI back then) and can also display HD images.