This projector from Acer utilizes 3D-BrilliantColor-DLP technology, achieving 5000 ANSI lumens and a contrast of 20000:1 at a resolution of XGA 1024 x 768. According to Acer, the lamp has a durability of 3000 hours. To facilitate room installation, the device is equipped with mechanical lens shift and additional keystone correction. Precise setup distances can be determined in the Projection Calculator. Regarding projection size, the value of 5000 ANSI lumens allows for an image width of up to 616 cm in darkened environments. In rooms with ambient light, the image width should be correspondingly reduced to a maximum of 411 cm. Regarding signal processing, the model is compatible with incoming 1080P content as well as 3D. The built-in HDMI-MHL (Mobile High-Definition Link) port enables screen mirroring from a smartphone while simultaneously charging it. Regarding professional networking, the device offers a classic RJ45 LAN port for control alongside HDBaseT for the lossless transmission of picture and sound over long distances. Equipped with a microphone jack and built-in speakers (10W), audio signals during presentations can be played back directly without an external audio system.
Display Type
1 x 0,55" DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
5000 / 4000 im Eco Mode
Screen
1667 Lux (200 cm Screen width)
Contrast
20000:1 full on/off
20000:1 full on/off
Black Level
0,2500 min. Lumen
0,083 min. Lumen
Lens shift
Vert.: +66,3% --49.3%
Lens shift
17%
26cm
+
Projector 1 cm under screen top edge
Resolution
XGA 1024 x 768
786.432 Pixel WUXGA 1920 x 1200 compressed
Standard-Portabel | External training and company presentations, as well as product presentations. Wide screen width or rooms with plenty of light (over 200 lumens).
HDMI 1.4a mit MHL in
2 x D-sub 15pin in 1 x out
YUV in
Cinch Video in
Cinch Stereo in
Mini Jack Audio in und out
USB Typ A,B in
RS232C Din 9 pin in
RJ45 mit HDBaseT in
Mikrofon in
You are using the projection distance according to the data sheet (1.85 - 2.95 : 1).
But according to the manual the value is much lower (1.40 - 1.91 :1).
What is correct????