As a projector, the Digital Projection TITAN sx+ 500 combines DLP technology with a resolution of SXGA+ 1400 x 1050, and is additionally specified with 6000 ANSI lumens and a contrast of 2000:1. The manufacturer lists the lamp life at 1500 hours. The specifications indicate lens shift optics, allowing the image to be physically shifted without introducing digital image artifacts. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Lens Calculator. A look at the light output reveals: The 6000 ANSI lumens are sufficient to illuminate an image width of up to 675 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 450 cm. Regarding signal processing, the model is compatible with incoming 1080P content. For convenient remote monitoring and administration, the projector is equipped with a classic RJ45 network socket. The projector was released in 2006 and is officially no longer distributed by Digital Projection. For your information: Compatible lamps for this device are no longer available in stores.
Display Type
3 x DC 0,95" DLP Chip SXGA 4/3 Ti Digital Light Processing Chip
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Very large screen width and rooms with plenty of light and shaded daylight.
Full HD 1080P compatible Lens shift Funktion Gamma correction Password protection Wi-Fi network compatible. Lan network compatible. Digital Zoom De-interlacer with 3:2 2:2 pull down.
Full HD 1080P compatible
Digital Projection Website
Product Sheet english
