The Eiki LC XNB3S is a LCD projector that brings 1700 ANSI lumens, a XGA 1024 x 768 resolution alongside a contrast of 350:1. According to Eiki, the included lamp lasts up to 2000 hours. To compensate for angled projection positions, the model features 2D keystone correction, which digitally corrects trapezoidal distortion. A look at the light output reveals: The 1700 ANSI lumens are sufficient to illuminate an image width of up to 359 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 239 cm. This model dates back to 2002 and is no longer part of Eiki's current product range.
XGA 1024 x 768
786.432 Pixel
SXGA 1280 x 1024 compressed
Video Modes
PAL/PAL-M&N/SECAM/NTSC/NTSC4.43
Application
Standard-Portabel | External training and company presentations, as well as product presentations. Small screen width, rooms with very little ambient light below 50 lumens.
Computer-Eingänge
1 x D-SUB 151 x 3,5 mm Klinke (Stereo) für Audio AV-Eingänge 3 x RCA (Y/Video, Pb/Cb, Pr/Cr), 1 x S-Video, 2 x RCA (Audio- R, L) Weitere Anschlüsse: 1 x D-SUB 15 Monitorausgang1 x DIN 8 Pin für Maussteuerung und serielle Schnittstelle1 x USB Typ B2 x RCA (Audio- R, L)
Ceiling Mounting
Yes, is possible.
Power
300W
Size WxHxD
333 x 89,5 x 260,9 mm (13,1"x3,5"x10,3") 7,71 L/dm³
Operating Noise
37dB
Key: 144 cm
Key: 41 cm
Key: 41 cm
Key: 24 cm
Weight
3,90 kg / 8,6 lbs.
Keystone
Vert.: +/-20° Hori.: +/-10°
Illumination
85%
Frequenz
H-sync: 15-80 kHz V-sync: 50-100 Hz Range max.: 100 MHz
Freeze
Eiki Contact
Product Sheet english
