As a projector for the Game-Portabel sector, the LG HS102 is equipped with 160 ANSI lumens, a SVGA 800 x 600 resolution and a contrast of 2000:1. The LED unit of this model is rated for up to 30000 hours of runtime. Daily use of 4 hours makes an operational lifespan of over 20.5 years possible. A look at the light output reveals: The 160 ANSI lumens are sufficient to illuminate an image width of up to 110 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 73 cm. Also on board is a local media player that allows reading and playing content directly from storage media. Since entering the market in 2008, production has been discontinued; the manufacturer no longer actively offers the model. This model continues to hold a solid place in our database search queries.
Display Type
1 x 0,55" DLP Chip SVGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
160
Screen
53 Lux (200 cm Screen width)
Contrast
2000:1 full on/off
2000:1 full on/off
Black Level
0,0800 min. Lumen
0,027 min. Lumen
Offset
50% Exactly on screen top edge →
SCREEN
+Projector
Resolution
SVGA 800 x 600
480.000 Pixel
Video Modes
PAL, SECAM, NTSC Media player formats: MP 43, DIVX_3_11, DIVX_4_12, DIVX_5_0, XVID, MP4S, RMP4, MP4V, _3IVX *.avi, *.mpg, *.mpeg, *.divx
Application
Game-Portabel | Very portable, small-screen projections. Very narrow picture width and rooms with very little light.
Light Source
LED
Light Life
30000 h.
Operating Costs
0,00 € LED
The projection is too dark. The screen width should be reduced.
>My HS102G has developed the habit of beeping for the first 5-10 minutes after switching on. The cause is probably the touch panel. The menus also open automatically.<
How did you fix this?
Autor:
Dominik 07.03.10
4
Stars
S: Firmware, service manual or tip
Hello,
my HS102G has developed the habit of beeping for the first 5-10 minutes after switching on. This is probably caused by the touch panel. The menus also open automatically. After switching it off and on again, the problem is gone. I don‘t need the touch panel and would like to switch it off completely. LG‘s service is lousy: they want me to send the device in straight away because of this minor issue and then probably have to live without a projector for weeks. When I asked for a firmware update or an operating hours counter, I got no answer at all. Does anyone know whether there is
- a firmware update for the device
- a service manual
- how to call up a service menu
- whether you can at least see an operating hours counter somewhere?
Integrated Mediaplayer
LG Website
Product Sheet english HC
