Based on DLP technology, the Toshiba TDP P5 / US device delivers 1100 ANSI lumens, a resolution of XGA 1024 x 768 and a contrast of 800:1 as a projector. The manufacturer rates the durability of the included lamp at 2000 hours. Looking at practical performance, up to 289 cm can be illuminated with 1100 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 193 cm. Since entering the market in 2002, production has been discontinued; the manufacturer no longer actively offers the model. As an archive device, the projector remains highly relevant in our database.
Display Type
1 x 0,7" DDR DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
1100
Screen
367 Lux (200 cm Screen width)
Contrast
800:1 full on/off
800:1 full on/off
Black Level
1,3750 min. Lumen
0,46 min. Lumen
Offset
60% 15 cm over screen top edge →
SCREEN
+Projector
Resolution
XGA 1024 x 768
786.432 Pixel
SXGA 1280 x 1024 compressed
Video Modes
NTSC,PAL,SECAM EDTV 480p, HDTV 1080i, 720p
Application
Micro-Portabel | Small mobile presentations. Small screen width, rooms with very little ambient light below 50 lumens.
Freeze Eco Mode Kensington Slot Picture-in-Picture Remote control with laser pointer und mouse control Die Frequenzen vertikal sowie horizontal im Prospekt deutsch stimmen nicht.
when I switch from video mode to Dvi mode, the image on the screen shifts.
In DVI mode, to be precise, the image on the screen is completely on!
But when I switch to video mode, the picture goes beyond the right side of the screen by about 30cm. Without always having to readjust everything!
Furthermore, I always have a fairly large area around the picture that is bright, up to 50 cm, without a picture! Therefore, image information is also possible here. But it is not used. So I only ever have a section that I need. So I don‘t have the full resolution either