Categorized in the Standard-Portabel segment, the DP9250 projector from Proxima projects with a XGA 1024 x 768 resolution, alongside 1400 ANSI lumens and a contrast of 350:1. The manufacturer specifies a runtime of 1500 hours for this projector's lamp. A major advantage for professional installations is the ability to use interchangeable lenses, allowing the projector to adapt to highly varied projection distances. Which optic is required for a specific case can easily be calculated via the Projector Calculator. A look at the light output reveals: The 1400 ANSI lumens are sufficient to illuminate an image width of up to 326 cm in darkened rooms. If room light is present, we recommend not exceeding a maximum width of 217 cm. This device is no longer manufactured and has been removed from Proxima's current lineup. Note: According to our information, replacement lamps (original or generic) are no longer available for this projector.
Display Type
3 x 1,3" LCD TFT Panel mit MLA XGA 4/3 Liquid Crystal Display with Micro Lense Array
Ansi-Lumen
Projector
1400
Screen
467 Lux (200 cm Screen width)
Contrast
350:1 full on/off
350:1 full on/off
Black Level
4,0000 min. Lumen
1,346 min. Lumen
Offset
45% 7 cm under screen top edge →
SCREEN
+Projector
Resolution
XGA 1024 x 768
786.432 Pixel
SXGA 1280 x 1024 compressed
Video Modes
NTSC, NTSC 4.3, PAL, PAL-M, SECAM
Application
Standard-Portabel | External training and company presentations, as well as product presentations. Small screen width, rooms with very little ambient light below 50 lumens.
Remote control with laser pointer und mouse control
Product Sheet
