Known as the cineo32 LED, this DLP projector by projectiondesign features basic specs of 750 ANSI lumens, a contrast of 7500:1 at a HDTV 1920 x 1080 resolution. projectiondesign lists a runtime of 100000 hours for the LED in this projector, covering an estimated 68.5 years based on a 4-hour daily runtime. Thanks to the combination of optical lens shift and digital keystone correction, the projected image's position can be adjusted very flexibly. The specifications identify the device as a model with an interchangeable lens option. Matching optional optics allow for exact adaptation to the required image size and projection distance, which can be calculated directly with the Projection Calculator. Regarding projection size, the value of 750 ANSI lumens allows for an image width of up to 278 cm in darkened environments. In rooms with ambient light, the image width should be correspondingly reduced to a maximum of 185 cm. Regarding signal processing, the model is compatible with incoming 1080P content. In the specifications, the operating noise is listed at a mere 30 decibels, indicating very quiet cooling. This model dates back to 2009 and is no longer part of projectiondesign's current product range.
Display Type
1 x 0,95" LVDS DC3 DLP Chip HDTV 16/9 Ti Digital Light Processing Chip
HDTV 1920 x 1080
2.073.600 Pixel
UXGA 1600 x 1200 compressed
Video Modes
PAL, SECAM, NTSC, EDTV HDTV 720p, 1080i, 1080p
Application
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Small screen width, rooms with very little ambient light below 50 lumens.
Full HD 1080P compatible
projectiondesign Website
Product Sheet english
