Behind the name DP 1050 is a LED-DLP projector by Kodak, whose main features include 650 ANSI lumens, a contrast of 500:1 and a XGA 1024 x 768 resolution. According to Kodak, the lamp has a durability of 2000 hours. Looking at practical performance, up to 222 cm can be illuminated with 650 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 148 cm. This device is no longer manufactured and has been removed from Kodak's current lineup.
Display Type
1 x 0,9" DLP Chip XGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
650
Screen
217 Lux (200 cm Screen width)
Contrast
500:1 full on/off 230:1 nach Ansi
500:1 full on/off 230:1 nach Ansi
Black Level
1,3000 min. Lumen
0,437 min. Lumen
Offset
-
Resolution
XGA 1024 x 768
786.432 Pixel
SXGA 1280 x 1024 compressed
Video Modes
PAL, PAL-M, PAL-N, SECAM, NTSC,
Application
Stationary | Permanent installation in the training room and meeting room as well as the conference room. Small screen width, rooms with very little ambient light below 50 lumens.
Remote control with mouse control
Kodak Website
Product Sheet
