Categorized in the Homecinema segment, the Cinema One projector from Davis projects with a SVGA 800 x 600 resolution, alongside 700 ANSI lumens and a contrast of 230:1. The manufacturer lists the lamp life at 2000 hours. Looking at practical performance, up to 230 cm can be illuminated with 700 ANSI lumens in dark environments. Once daylight is in the room, the image should ideally be no wider than 153 cm. The projector was released in 1999 and is officially no longer distributed by Davis.
Display Type
1 x DLP Chip SVGA 4/3 Ti Digital Light Processing Chip
Ansi-Lumen
Projector
700
Screen
233 Lux (200 cm Screen width)
Contrast
230:1 nach Ansi 500:1 full on/off
230:1 nach Ansi 500:1 full on/off
Black Level
3,0435 min. Lumen
1,026 min. Lumen
Offset
-
Resolution
SVGA 800 x 600
480.000 Pixel
XGA 1024 x 768 compressed
Video Modes
NTSC, PAL, SECAM, NTSC 4.43, PAL-M, PAL-N
Disc Recognition
DVD | HD Blu-ray | 3D Blu-ray | 4K UHD Blu-ray
Application
Homecinema | Small screen width, rooms with very little ambient light below 50 lumens.
S-Video: (1) Mini DIN 4-pin
Video: (1) RCA jack
Audio: (2) RCA jack und (2) mini stereo
RGB: (2) Mini-D-sub 15pin (2) stereo mini pin jack
RS232C
• Output terminals:
Audio: (2) RCA jack und (2) mini stereo
I bought the Cinema One in 1999. It was comparatively very good back then. I only use it on my PC, the picture quality was ok. As long as the lamp is still alive, I‘ll use it in my vacation apartment. My main projector has been an Optoma EP1690 for a few years now (also on the PC): it is much quieter, has a much higher brightness (watching TV in the afternoon without darkening is no problem), Half HD resolution, costs a good 1000 euros. Conclusion: The Cinema One is a nice old device for the museum. For the price of a replacement lamp, you can get a new projector HD projector: Acer H5350!
Autor:
Michael Wolf 09.04.07
4
Stars
Fit for the future !?
About 6 years ago I bought a Davis Cinema one. This projector has a rather modest picture if you run it without additional equipment, but with the addition of an I scan Pro and an anamorphic lens from Isco, the Davis conjures up a picture that is sensational. Is it even possible to use it with these high-resolution data carriers? confused::)